Assembly Instructions

1. Open each door. Remove top trim by unlocking cams as shown and attach MDF block (H1) to trim using block screws (H4).

2. Attach two single magnetic catches (H2) to MDF block using catch screws (H5).

3. Install top trim by sliding posts back into holes and secure the cams.

4. Attach metal plate (H3) to top of each door using plate screw (H6) as shown. (Be sure to note the orientation of the plate.)

STEP 3

For open cabinet assembly install single magnetic catches to top trim.

(H6) x 2

plate screw

(H4) x 2

block screw

(H5) x 4

catch screw

(H3) x 2

metal plate

(H1) x 1

MDF block

(H2) x 2

single magnet catch