Assembly Instructions

ManualsBrandsDesigners Image ManualsCloset OrganizersDesigner's Image™ Cottage 2-Door Solid Door Kit

Door Kits

SKU Reference # Finish

211-4575 4246 White Glass

211-4566 4247 White Solid

211-4576 4261 Java Glass

211-4567 4263 Java Solid

211-4577 4248 Cottage Glass

211-4568 4249 Cottage Solid

211-4676 14600 Charcoal Glass

211-4667 14599 Charcoal Solid

01-13965-00 11/20

Tools Needed:

screwdriver

Summary of content (8 pages)

PAGE 1
Door Kits Assembly Instructions SKU Reference # Finish 211-4575 211-4566 211-4576 211-4567 211-4577 211-4568 211-4676 211-4667 4246 4247 4261 4263 4248 4249 14600 14599 White Glass White Solid Java Glass Java Solid Cottage Glass Cottage Solid Charcoal Glass Charcoal Solid Tools Needed: screwdriver 01-13965-00 11/20
PAGE 2
SAFETY PRECAUTIONS WARNING • This unit contains small parts which could be a choking hazard for small children. Children should be under adult supervision at all times or serious injury could occur. • Do not hang this unit on the wall. The product structure is not designed for wall hanging. Serious bodily injury, damage to personal belongings, and/or damage to the wall may occur. • Follow proper safety procedures if using power tools and ladders.
PAGE 3
HARDWARE DESCRIPTION QUANTITY A B C (H1) x 1 MDF block (H2) x 2 single magnet catch (H3) x 2 metal plate (H4) x 2 block screw (H5) x 4 catch screw (H6) x 2 plate screw door panel 2-piece hinge handle and screws 2 4 2 B A C 3
PAGE 4
STEP 1 TURN THIS SCREW CLOCKWISE TO LOOSEN LOOSEN THIS SCREW FULLY - DO NOT REMOVE! BASE/TOWER HINGE DOOR HINGE DOOR HINGE 1. Locate hinges. Loosen two screws (as indicated) to separate the hinges into two parts. 2. Place a door hinge into each large hole on back of door panel as shown. Align screw holes and tighten screws to secure. Repeat for both door panels. 3. Attach a handle to each door panel with handle screws.
PAGE 5
STEP 2 1. Attach base hinges to SMALL holes at the top and bottom closest to the open end of the cabinet. Be sure open end of hinge faces front.. 2. Slide door hinge over center of base cabinet hinge and tighten screw as shown. 3. Adjust doors to hang evenly by turning various hinge screws as shown.
PAGE 6
STEP 3 For open cabinet assembly install single magnetic catches to top trim. (H1) x 1 MDF block 1. 2. 3. 4. 6 (H2) x 2 single magnet catch (H3) x 2 metal plate (H4) x 2 block screw (H5) x 4 catch screw (H6) x 2 plate screw Open each door. Remove top trim by unlocking cams as shown and attach MDF block (H1) to trim using block screws (H4). Attach two single magnetic catches (H2) to MDF block using catch screws (H5). Install top trim by sliding posts back into holes and secure the cams.
PAGE 7
STEP 4 For divided cabinet assembly install single magnetic catches to bottom shelf. x2 x4 (H2) x 2 single magnet catch (H3) x 2 metal plate (H5) x 4 catch screw x2 x2 (H6) x 2 plate screw 1. Attach single magnetic catch (H2) to each side of divider using catch screws (H5) as shown. 2. Be sure the magnet is facing the open end of the cabinet. 3. Attach metal plate (H3) to bottom of each door using plate screws (H6). (Be sure to note the orientation of the plate.
PAGE 8