Installation Instructions

STEP 7

1. Secure cam posts (H1) into holes as shown. PLEASE NOTE: Cam post is secure when threads on screw are not showing.

2. Flip the unit over so the open side is facing up.

3. Align the cam posts in the trim with the appropriate holes as shown and install. Tighten cam locks to secure.

(H1) x 4

cam post

NOTE: Thicker edges of trim should be positioned towards the top and

bottom ends of the unit unless stacking, then choose either option 1 or 2

for the adjoining trim preference.

option 1 option 2