WIZ APP SETUP INSTRUCTIONS
SETTING UP THE WIZ APP ` Before you start: • Connect your phone/tablet to a 2.4GHz Wi-Fi network. • Ensure that your desired device and lighting fixture are within range of the same Wi-Fi network. • Check that the phone/tablet has a strong Wi-Fi signal. Note: These instructions are formatted using the Android version of the Wiz app. While functionally identical to the iOS version, structural differences may cause confusion. For help with Wiz iOS, and more, visit: https://www.wizconnected.
CONNECTING YOUR FIXTURE 1 PAIRING YOUR DEVICE Note: To make pairing easier for bluetooth capable lamps, keep bluetooth activated on your phone during setup. • • Once you’ve created a room, you will be prompted to connect your device. Select “Add a Device” from the home menu. [Fig. 3A] If a pop-up appears [Fig. 3B], follow the Bluetooth pairing steps below. Fig. 3A Bluetooth Pairing • Some fixtures are able to pair to the Wiz app via bluetooth.
CONTROLLING YOUR DEVICE 1 • • MAIN MENU Your installation’s main features can be accessed through the main menu. See Fig. 8 for a breakdown of the main menu and its various uses. Fig. 8 Side Menu Add new device Change rooms Light Icon Color Presets (see next step) Current Device Settings Adjustment Slider * Brightness Slider Toggle Light On Toggle Light Off Night Light Note*: The adjustment slider controls the paramaters for whichever setting is currently selected.
CONTROLLING YOUR DEVICE (CONT’D) 2 • • • 3 • • COLOR PRESETS Press the “Color Presets” button. [Fig. 8] to access the Color Presets menu. From here you can change the light’s: • Warmth • Simple Presets (static color presets designed for specific situations) • Dynamic Presets (changing colors based on various situations) • Custom color, and more. More options are available, for more information, visit: https://www.wizconnected.
CONTROLLING YOUR DEVICE (CONT’D) SHARING YOUR HOME 4 • • • • To add guest users to your home, access the “Settings” tab from the side menu. [Fig. 11] Under “Invitations” press “Invite” to add guests to your home. [Fig. 11] You will receive a code. Press the share button next to the code to share it with the Guest. [Fig. 12] In the Guest’s app, enter the settings menu and press “Join Home,” and enter the provided code. [Fig.
NOTICE FCC STATEMENT This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communication.
