Instructions / Assembly

ENGLISH
Troubleshooting
Symptoms Possible Cause Solution
Lights are not coming
on at all
1.No power connection
2.Wrong wiring
3.Faulty bulbs
1. Make sure both the circuit
breaker and wall switch are in the
ON position
2. Check the wiring to make sure
all the connections
are correct and secure
3.Make sure the bulbs are not
damaged and have good connec-
tion with the bulb socket
Motion sensor triggers
with motion but stays on
1.Heat is being reected
from surrounding objects
to the sensor
2. A light bulb is too close to
the Sensor creating heat
3. Installed in moving,
busy area
1. Reposition the motion sensor
2. Adjust the light bulb position
away from Motion Sensor
3. Move the Motion Sensor away
from busy areas such as sidewalks,
or passing cars
Motion sensor comes on
randomly, or blinks in
test mode
1.Heat inuence
2.Motion sensor aiming
issue
1. Reposition the bulbs away from
Motion Sensor
2. Do not aim at heating/cooling
ducts, pools of water, windows, or
smooth walls
Not enough or too much
detection range
1.Motion sensor
RANGE setting
1. Adjust the Motion Sensor’s
sensitivity to desired RANGE level