Instructions / Assembly

ENGLISH
TIMER Setting (Dusk to Dawn Control)
The Dusk to Dawn mode has 4 setting options.
1. OFF Do not want to use the timer function; push
the TIMER touchpad key to move the LED to the OFF
position on the left (will ash 2 times)
2. 3 HOURS or 6 HOURS Set the sensor to automatically
turn the lights on at Dusk and o after 3 or 6 hours by
pushing the TIMER touchpad key to the 3 or 6 hours
setting position (the motion function is o in this mode)
3. DUSK TO DAWN Push the TIMER touchpad key to
move the LED to the DUSK TO DAWN position, the light
xture will automatically turn ON at nightfall and turn
OFF at dawn (the motion function is o in this mode)
0 ft. 17 ft. 45 ft. 70 ft.
17 ft. 45 ft. 70 ft.
8 ft.
0 ft.
SIDE VIEW FOR AIMING UNIT
SET-UP (continued)
Figure 2
4 LEDs
Position 1 Position 2 Position 3 Position 4
TIME TEST MODE 1 minute 5 minutes 20 minutes
SENS MIN (17ft) Norm (45ft) Boost (70ft) Position 1
TIMER OFF 3 hours 6 hours Dusk to Dawn
6