Instructions / Assembly

ManualsBrandsDesigners Edge ManualsLighting150-Watt 180-Degree Bronze Motion Activated Outdoor Dusk to Dawn Security Flood Light with Twin Head and Bulb Shields

INFARED MOTION

ACTIVATED SECURITY LIGHT

INSTALLTION INSTURCTIONS

Model # L6002

10 Year Warranty on Fixture

(Does not apply to bulbs, which have no warranty)

Congratulations and Thank You! The fixture you have purchased should give you 10

years of trouble free service. We take pride in the design and construction of each of our

products and work to maintain the quality of our materials and craftsmanship to assure

your satisfaction.

This product is warranted to be free of defects in workmanship and materials for a period

of 10 years from the original date of purchase. If any problems appear (other than burnt

out bulbs, which carry no warranty) within 10 years, the purchaser may return the item,

freight prepaid, together with a copy of your original purchase receipt to:

Summary of content (7 pages)

PAGE 1
INFARED MOTION ACTIVATED SECURITY LIGHT INSTALLTION INSTURCTIONS Model # L6002 10 Year Warranty on Fixture (Does not apply to bulbs, which have no warranty) Congratulations and Thank You! The fixture you have purchased should give you 10 years of trouble free service. We take pride in the design and construction of each of our products and work to maintain the quality of our materials and craftsmanship to assure your satisfaction.
PAGE 2
Southwire Co. 11290 80th Ave. Pleasant Prairie, WI 53158 Upon receipt of the item prepaid with a letter describing the problem, and a check for $7.50 to cover return postage and handling, the company will, at its option, either repair or replace the defective part or fixture at no charge to the purchaser. This warranty does not apply to fixtures that have been used for rental or commercial purposes.
PAGE 3
or reflective surfaces, such as heating vents, air conditioners, large moving trees or pools of water. Whenever possible, locate the unit so that motion moves across the coverage area, not directly towards or away from the motion sensor. It is because the motion sensor is more sensitive to motion across it, not towards or away from it. Note: The detection range specified above is based on the sensor’s performance in conditions that represent average temperatures found in North America.
PAGE 4
Remark: Fill in the wall plates and mounting surface with silicone. CAUTION: Before beginning installation disconnect power to the location where the light will be installed by shutting that controls the light is not sufficient to prevent electrical shock.
PAGE 5
box is deep in the walls, too deep for included screws, you may obtain longer screws from local hardware store. Make sure you match threads correctly. 8. Wiring portion is now complete, so you can install bulbs. Again, double check wall switch is in off position and power is shut off at breaker. OPERATION Test Mode Activate the photocell and allow the motion detector to function in daylight for time setting. Auto Mode Turn knob from 30 seconds to 10 minutes as needed.
PAGE 6
“Range” control either way to the desired sensitivity level. 6. Turn the TIME knob clockwise to adjust how long you want the lights to stay on after the unit is activated. The maximum (full clockwise) is about 10 minutes. The minimum (full counter clockwise) is about 30 seconds. SPECIFICATIONS Sensor Range Up to 70 ft.
PAGE 7
3. Adjust Range sensitivity adjustment. Do not use this adjustment to compensate for poor aiming. 4. Aim motion detector head lower, away from moving busy areas such as sidewalks and streets. Motion Detector comes on randomly, or blinks in test mode. 1. Move floodlights away from motion detector head, or use lower wattage lamps. 2. Aim motion detector head lower. 3. Make sure motion detector head is not aimed at heating/cooling ducts, metal sheds, pools of water, windows, or smooth walls. 4.