Product Manual

2 Year Warranty on fixture
(Does not apply to bulbs, which have no warranty)
Congratulations and Thank You from The Designer’s Edge!
The fixture you have purchased should give you years of trouble free service.
We take pride in the design and construction of each of our products and work
to maintain the quality of our materials and craftsmanship to assure your
satisfaction.
This product is warranted to be free of defects in workmanship and materials
for a period of 2 years from the original date of purchase. If any problems
appear (other than burnt out bulbs, which carry no warranty) within 2 years,
the purchaser may return the item, freight prepaid, together with a copy of
your original purchase receipt to:
The Designer’s Edge
11730 N. E. 12th street
Bellevue, Washington 98005
Upon receipt of the item prepaid with a letter describing the problem, and a
check for $7.50 to cover return postage and handling, the company will at its
option either repair or replace the defective part or fixture at no charge to the
purchaser. This warranty does not apply to fixtures that have been used for
rental or commercial purposes. It does not cover fixtures that have been altered
in any way or fixtures that have been subject to misuse, accidents or damage
in transit.
IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES. NO CHARGES WILL BE ACCEPTABLE
FOR UNAUTHORIZED REPAIRS, PARTS OR SERVICE.
Some states do not allow limitations on how long an implied warranty lasts
and do not allow exclusions or limitation of incidental damages, so parts or
all of this warranty limitations or exclusions may not apply to you. Legal warranty
rights will vary from state to state and you may have other rights.
IMPORTANT NOTICE:
Every attempt has been made to deliver a quality product that will give
you years of trouble free service. In the event that you have problems
with the fixture. Please DO NOT RETURN TO PLACE OF PURCHASE.
PLEASE CALL THE NUMBER BELOW FOR BULB OR PARTS
PROBLEMS:
[phone]
8-5 PM West Coast Time. All warranty problems are
handled directly through The Designer’s Edge.
www.designersedge.com
112
ENGLISH
ESPANOL
• Para reemplazar el foco de esta luminaria, siempre apagarla
primero y darle bastante tiempo para que se enfríe.
• Nunca encender esta luminaria sin el lente o sin la rejilla de
seguridad.
• No es un artefacto para usar en lugares peligrosos.
• No es para uso sumergido en tinas, piscinas, lagunas u otros
cuerpos de agua.
• Este artefacto no está diseñado, ni es seguro, para usarse en
lugares potencialmente peligrosos , tales como en ambientes
con atmósfera explosiva o inflamable, con gases corrosivos,
pinturas inflamables, solventes, mezclas inflamables,
diluyentes de pintura, vapores encendibles, polvo combustible,
fibras encendibles suspendidas en el aire o en otras
atmósferas inflamables.
• Nunca usar en presencia de líquidos altamente volátiles como
gasolina.
• Nunca usar con un foco de mayor potencia a la indicada para
esta luminaria porque se recalentará, se volverá insegura o se
acortará su vida útil.
Instrucciones de Seguridad
ADVERTENCIA: Cortar el suministro de corriente para evitar
el riesgo de choque eléctrico. Este artefacto debe
cablearse de acuerdo al Código Eléctrico Nacional (NEC de
EE.UU.) y a los códigos y ordenanzas locales; y para
seguridad personal, debe conectarse a tierra. Todo el
trabajo debe hacerlo un electricista calificado.
MONTAJE
ADVERTENCIA: Cortar el suministro de corriente antes de
instalar o de dar servicio a este artefacto.
NOTA: Asegurarse de conectar el artefacto a una fuente de
CA de 120voltios. Deben utilizarse conectores de alambres
certificados por U.L. Asegurarse que no queden hilos de lo
alambres sobresaliendo de los conectores de alambres.
1. Sacar la guarda y el lente de vidrio.
2. Instale la carcasa sobre la pared utilizando las dos lengüetas
y tornillos suministrados.
Instrucciones de Instalación