Instructions / Assembly

Safety Instructions
• Please read all instructions carefully prior to using The Designers Edge
patio heater.
•
designed for indoor use only.
• Check that your main supply voltage is the same as voltage indicated
on unit.
• Disconnect power during installation and during lamp replacement.
• Check mounting plate to make sure heater is securely fastened in
place.
•
CAUTION - The lamp is HOT. Make sure it is cool before replacing.
• Keep out of reach of children. Lamp gets extremely hot during
operation.
• Do not use an extension cord with heater. Do not let cord come in
contact with heater during operation.
• For use on 15 amp circuit breaker only.
•
•
on and allow to cool before re-lamping.
ENGLISH
WARNING
Before using this heater read all warnings and instructions: LAMP GETS HOT!
ALLOW TO COOL BEFORE RE-LAMPING
H-12000_inst.indd 3 5/20/08 9:37:08 AM