Installation Guide

8
11. ATTACHING THE 17W
LED ASSEMBLY
NOTE: Before starting installation, disconnect
the power by turning off the circuit breaker or
removing the fuse at fuse box. Turning power
off using the fan switch is not sufficient to
prevent electric shock.
Figure 16
17W LED assembly
Step 1. While holding the 17W LED assembly
under your fan, firmly snap the wire connection
plugs together.
Step 2. Attach the 17W LED assembly to the
switch box by twisting tightly.
Note: This is an integrated LED light kit assembly
and can not be disassembled
to prevent electronic shock.
Switch box
Connection plugs