Installation Guide

Figure 5
4
5. ATTACHING THE FAN
BLADES
Step 1. Insert the blades through the slots on the
fan motor assembly.
Step 2. Attach the fan blades to the fan motor
assembly using the blade screws and fiber
washer and tighten them securely.
Step3. Repeat this step with the other blades.
NOTE: When installing the blades, ensure the
sides with “THIS SIDE UP” face the ceiling.
CAUTION: Make sure all screws are
tightened securely.
Blade screws
Fiber washers
Blade
Fan housing screws
Fan housing
Fan motor assembly
Fan motor assemby
THIS SIDE UP
Figure 6
6. ATTACHING THE FAN
HOUSING
Align holes in the housing and the fan motor
assembly, and secure with the screw. Ensure all
the screws are tightened.