Installation Guide

4
Installing The Light Kit
Caution: Be careful not to touch
t
he glass area of the bulb, hold
with tissue during installation
as oil from your hands can cause
early lamp failure.
2. Plug in the light wires from fan and the
light wires from light kit plate with pin
and plug . Place the light kit plate into
the bottom housing. (see Fig.13)
4. P
lug the G9 Bulb into the socket (see
Fig.15)
3. I
nstall light kit plate using the three
screws and tighten them securely. (see
Fig.14)
1. R
emove one screw and loosen the other
two screws from light kit adapter. (see
Fig.12)
5. Carefully lift the glass shade up inside the
light fixture as far as it will go. Rotate the
shade in a clockwise (to the right) direction
until it is held tightly in place by the three
tabs (see Fig.16)
FIG.14
FIG.15
FIG.16
SCREW
BULB
SOCKET
LIGHT KIT PLATE
LIGHT KIT PLATE
GLASS
FIG.13
PIN AND PLUG
LIGHT KIT
PLATE