Installation Guide

3
Installing The Bottom Housing
1. Remove one screw and loosen the other
two screws from light kit adapter.(see
Fig.12)
2. P
lace the bottom housing and twist the
bottom housing to tighten. (see Fig.13)
FIG.8
FIG.9
FIG.10
FIG.11
FIG.13
FIG.12
HANGER
BRACKET
HANGER
BRACKET
SCREW
SCREW
SCREW
CANOPY
CANOPY
BOTTOM
HOUSING
GREEN WIRE
BLACK WIRE
BLACK WIRE
WHITE WIRE
WHITE WIRE
BLUE WIRE
BLUE WIRE
GREEN
WIRE
GREEN WIRE
CANOPY HOLE COVER
LIGHT KIT
ADAPTER
Wiring Your Ceiling Fan
Caution: To avoid possible elec-
t
rical shock,be sure electricity
is turned off at the main fuse box
before wiring.
1. If you are not sure that electrical box is
grounded,contact a licensed electrician
for advice. It must be grounded for safe
operation.
2. C
onnect the black wire from receiver to
the black wire from fan with wire nut.
Connect the white wire from receiver to
the white wire from fan with wire nut.
Connect the blue wire from receiver to
the blue wire from fan with wire nut.
Connect the green wire from ceiling and
green wire from hanger bracket with green
wire from hanger ball with wire nut. (see
Fig.8)
3.
4.
5.
Remove one screw and loosen the other
s
crew from the hanger bracket.(see Fig.9)
Mount the canopy on the two screws in
the hanger bracket and twist the canopy,
so the screw heads hold the canopy in
place. (see Fig.10)
Retighten the two screws and place the
canopy hole cover and twist the cover to
tighten up. (see Fig.11)