Installation Guide

10
Figure 21
Figure 22
13. OPERATING
INSTRUCTIONS
NOTE: Wait for fan to stop before changing
the setting of the slide switch.
Turn on the power and check the operation of
your fan.
1. 3-speed pull chain- it controls the fan
speed as follows: 1 pull- High, 2 pulls-
Medium, 3 pulls- Low, and 4 pulls- Off.
Speed settings for warm or cool weather
depend on factors such as the room size,
ceiling height, number of fans, and so on.
2. Light pull chain it controls the light in "ON"
or "OFF".
The slide switch controls directions: forward
(switch left ) or reverse (switch right ).
Warm weather - (Forward) A downward air
flow creates a cooling effect as shown in
Figure 21. This allows you to set your air
conditioner on a higher setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow
moves warm air off the ceiling area as shown
in Figure 22. This allows you to set your
heating unit on a lower setting without
affecting your comfort.