Installation Guide

Wiring Your Ceiling Fan
Installing Blade Assembly
1. If you are not sure that the electrical box
is grounded, contact a licensed electrician
for advice. It must be grounded for safe
operation.
2. Connect the black wire from the outlet
box to the black and blue wire from fan
with wire nut. Connect the white wire
from outlet box to the white wire from
fan with wire nut. Connect the green wire
from the outlet box to the green wire from
the fan (see Fig.5)
3. Loosen the two canopy mounting screws
from the hanger bracket. Mount the canopy
on the two screws in the hanger bracket
and twist the canopy, so the screw heads
hold the canopy in place. Retighten the
two screws (see Fig.6)
Install the screw, washer, blade and blade
bracket together & tighten them securely
(see Fig.7)
1.
Attached each blade assembly to the fan
body using the blade screws. Tighten them
securely (see Fig.8)
2.
FIG.6
FIG.7
FIG.8
FIG.5
BLACK
HANGER
BRACKET
CANOPY
SCREW
BLADE
BRACKET
BLADE
SCREW
BLADE
WASHER
SCREW
3
Caution : To avoid possible electrical
shock, be sure electricity is turned off at
the main fuse box before wiring.
BLACK
WHITE
WHITE
GROUND
GROUND
BLUE