Installation Guide

10
Figure 19
Figure 20
Figure 21
14. OPERATING YOUR
TRANSMITTER
Restore power to ceiling fan and test for proper
operation.
A. HI, MED, and LOW buttons:
These three buttons are used to set the fan
speed as follows:
HI= high speed
Med= medium speed
Low= low speed
B. FAN OFF button:
This button turns the fan off.
C. D/L and U/L
button:
This button controls the down light and up light.
Press and release the button to turn the light
ON or OFF. Press and hold the button to set
the desired brightness. The light key has an
auto-resume, it will stay at the same
brightness as the last time it was turned off.
D. REV Button:
This button is used to change the direction of
the rotation of the blades; forward for warm
weather or reverse for warm weather.
E. OFF-ON Button
This button turns the power Off and On to the
fan and light(s).
Speed settings for warm or cool weather
depend on factors such as the room size.
Ceiling height, number of fans and so on.
NOTE: to change the direction of the rotation of the
blades the fan must be in operation mode.
Warm weather - (Forward) A downward
airflow creates a cooling effect as shown in
Fig. 20. This allows you to set your air
conditioner on a warmer setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow
moves warm air off the ceiling area as shown
in Fig. 21. This allows you to set your heating
unit on a cooler setting without affecting your
comfort.
HI
REV
MED
FAN OFF
LOW
ONOFF