Installation Guide

-2-
Unpacking Precautions
If using a sharp object to unpack the cabinet components and the packing materials, be
careful to avoid scratching or damaging the cabinet components. The various packing
materials may be used to protect the cabinet components during assembly. During the
unpacking process, place the various components away from and to the side of the work
area so that they will not be inadvertently knocked over or otherwise damaged.
Base Cabinet Model Variations
These assembly instructions include all the steps required to assemble a Base Cabinet
with a Shelf and Drawers. However, they can also be used to assemble a Sink-type Base
Cabinet with a Shelf (skip the steps covering assembly of the drawers and installation of
the rails and rail holders). The illustrations included in these assembly instructions are
based on the Base Cabinet with a Shelf and Drawers.
Required Tools
Phillips Screwdriver
Rubber Mallet Wood
Glue
Hardware Considerations/Screw Size Clarification
(I) Small 1/2'' (J) Medium 7/8''
(K) Large 1 1/8''
Step 1：
Lay the face frame with doors(A) on a soft surface, doors facing down.
Step 2
Attached rubber bumpers to both the top and bottom of each drawer where they make
contact with the face frame to prevent damage and reduce noise.