Installation Sheet
RIPON 14.5” LED CEILING LIGHT
ASSEMBLY/INSTALLATION INSTRUCTIONS
branch circuit conductor.
shock.
# 578641
Customer Service 1-800-558-8700
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)
standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a
referencing the illustrations on the installation instructions.
1. Gently take all parts out of the package, lay them on a smooth surface. Remove the MOUNTING SCREWS
from the fixture. Attach the MOUNTING BRACKET to the OUTLET BOX using the MACHINE SCREWS.
Secure MOUNTING BRACKET to OUTLET BOX with WOOD SCREWS and WALL ANCHORS.
C - Attach the fixture GROUND WIRE to the MOUNTING BRACKET with the green GROUND SCREW.
Then connect it to the supply ground wire with a WIRE NUT. Carefully tuck wires back into the OUTLET BOX.
2. Make wire connections with WIRE NUTS:
A - Connect the BLACK wire from Fixture to the black supply wire.
B - Connect the WHITE wire from Fixture to the white supply wire.
3. Attach the FIXTURE to the MOUNTING BRACKET through as shown, and secure it with MOUNTING SCREW.
CAUTION
GENERAL
ASSEMBLY AND INSTALLATION
ASSEMBLY AND INSTALLATION
(CONT.)
Please read carefully and save these instructions, as you may need them at a later date.
Turn off the power at fuse or circuit breaker.
Turn on the power at fuse or circuit breaker.
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN.
BLACK(HOT)
WHITE(NEUTRAL)
GROUND SCREW
MOUNTING BRACKET
MACHINE SCREWS
WOOD SCREWS
WALL ANCHOR
MOUNTING SCREWS
FIXTURE
OUTLET BOX
WIRE NUT
GROUND WIRE