Instructions / Assembly

ESSEX 3LT ISLAND LIGHT
ASSEMBLY/INSTALLATION INSTRUCTIONS
installation.
shock.
#519801
Customer Service 1-800-558-8700
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)
standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a
referencing the illustrations on the installation instructions.
Phillips screwdriver.
CAUTION
GENERAL
TOOLS REQUIRED
ASSEMBLY AND INSTALLATION
ASSEMBLY AND INSTALLATION
(CONT.)
Please read carefully and save these instructions, as you may need them at a later date.
Turn off the power at fuse or circuit breaker.
Turn on the power at fuse or circuit breaker.
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN.
JUNCTION BOX
MOUNTING SCREWS
WIRE NUTS
CROSS BAR
GROUND SCREW
FIXTURE
CEILING PLATE
BALL NUTS
STEMS
FIXTURE SCREWS
#519793
1. Gently take all parts out of the package, lay them on a smooth surface, unscrew the BALL NUTS and
the FIXTURE SCREWS. Attach the CROSS BAR to the JUNCTION BOX using (2) MOUNTING
SCREWS.
2. Install STEMS based on the desired length of the item, adding CEILING PLA
3. Make wire connections with WIRE NUTS:
A - Connect the black wire from Fixture to the black supply wire.
B - Connect the white wire from Fixture to the white supply wire.
connect it to the supply ground wire with a WIRE NUT. Carefully tuck wires back into the JUNCTION
BOX.
4. Attach the CEILING PLATE to the CROSS BAR through SCREW HOLES as shown, and secure it
with BALL NUTS.
5. Install BULBS (not included). See relamping label at socket area or packaging for maximum allowed
wattage.
SOCKET RING
BULB (not included)
A
B
C
SCREW HOLES
Item # 519801 (ESSEX 3LT ISLAND LIGHT GAL)
Item # 519793 (ESSEX 3LT ISLAND LIGHT BRZ)