Specification
The countertop is affixed to the cabinet by using glue. Please follow the instruction below to
attach the countertop to the cabinet.
The countertop is VERY HEAVY and FRAGILE, be sure to have one or more helper to
move the countertop. Before getting started, please prepare for the following:
Lower the countertop so that it lays flat on the cabinet, while supporting it from
the
side and front. Be careful not to catch your fingers under the countertop.
It is best to lower the countertop by supporting from the front as it comes down
onto the cabinet.
Reattach the countertop using the wood connectors. (See the instruction above)
PART LIST
ATTACHING BACKSPLASH
Following tools are required (not supplied)
REMOVING / INSTALLING DRAWER
REMOVE
INSTALL
Never lift the countertop flat Never carry the countertop flat Lift the top with long edge facing-up
IMPORTANT INSTRUCTION FOR HANDLING COUNTERTOP
24H!
M
J
I
K
L
PART #
DESCRIPTION
A Backsplash
B Countertop
C Basin
D
E
F
H
Door (left)
I
J
K
Drawer Handle
L
Door Handle
M
Hinge
Flip down panel
Drawer
Triple depth drawer
PART #
DESCRIPTION
G
Drawer glides
INSTRUCTION FOR ATTACHING COUNTERTOP
B
D
D
E
E
E
E
E
F
G
H
I
H
I
Door (right)
Triple depth drawer
(left)
(right)
A
C
C
E
1
1. Place countertop backward, align the sink to the pre-drawn mark.
2. Apply epoxy between the countertop and sink.
3. Fasten the sink clip over the sink lip. DO NOT OVER TIGHTEN to avoid cracking the countertop.
4. Apply additional epoxy around the edge.
5. Allow sufficient time for it to dry. For actual wait time, refer to epoxy instruction.
PLEASE INSPECT COUNTERTOP CAREFULLY FOR CRACKS AND FRACTURES. CONTACT
MANUFACTURE IMMEDIATELY IF DAMAGE IS DISCOVERED. DO NOT INSTALL A
DAMAGED COUNTERTOP AS IT WILL RESULT IN DENIAL OF REPLACEMENT.