Installation Guide

V2.00 - Installation Instructions, Specifications and Project Plans are effective 9/6/2016 . This information is updated periodically
and should not be relied upon after 2 years from 9/6/2016 . Please visit OZCOBP.com to get current information.
for dimensional details, see Overview page
move posts until
top and bottom
dimensions are
the same and
posts are level.
dimension shown
is for reference
Project 333 (10x12) step 4
DIY Vineyard Pergola Beam & Support
flush
once posts are even &
level, temporarily secure
structure with 2x4 &
clamps then install beams
then remove 2x4 & clamps
9'9
7
8
"
9'9
7
8
"
=
=
Tip:
To ensure level posts, use Post Level
(OZCO #50740; not included)
Tool Required
3/8" Driver
Cap (finger tight)
OWT Timber Screw