User's Manual

EXHIBIT D: FTS PHONE SOFTWARE SPEC (SW)
Initialize each page: Page 7/15
1 Power on/off/Key Lock
The power switch can switch the phone to power on/off/key lock mode. When the phone is in
key lock mode, all keys will be invalid except when a call is incoming the C key and Talk Key
are valid, and the Volume wheel.
2 DIAL
When a dialing key is pushed, the corresponding letter will be displayed in screen and a keytone will be played
except when the phone is in Down Mute Mode.
If the letters keyed in is more than the max letters that can be displayed in screen, the letters displayed will roll
to left and the new one will be added at the end of the existing letters.
When the user pushes the C Key, the numbers keyed in will be cleared.
3 Speed Dial
Speed dial will be executed (call activated) when holding a 0-9 number key for 2 seconds, and a
confirmation ‘Click’ will be played。
4 Speed dial number seting
,for example: if ** 1*12345678#.
1) press * key to input **;
2) press number key 1 to input 1;
3) press number key to input the phone number 12345678;
4) press the # key to input #;
5) press the Talk key to save the speed dial number.
5 Voice Volume setting