User's Manual

No power
Problem
Solution
Plug another power cord or change a power outlet.
No picture
Make sure the video cable is connected securely.
The cable may be damaged. Change another one.
No sound
Make sure the audio cable is connected securely.
Remote Control does not
work
The batteries may be exhausted. Replace the batteries.
The playback picture is
in poor quality or sound
distortion.
The disc is dirty.
Use a clean cloth to clean the disc before playback.
The video signal from the external component is copy-protected.
Cannot connect network
please check if the disc is legal copy.
Confirm whether the network connection is ok.
After network connection,
cannot download file
Whether the capacity of Storage is full. if it is full, please Erase BD-Live
data in the Home menu and reset the unit.
Change USB device and then test it.
Confirm whether the network connection is ok
You must insert USB memory with a minimum memory of 1GB.
Picture-in-picture is not
played with BD-Video.
Confirm whether the disc supports picture-in-picture.
The unit is on but cannot
be operated.
Disconnect the AC power supply cord, wait one minute, then reconnect it.
The remote control is too far from the Blu-ray Player or does not
point at the Blu-ray Player.
TROUBLE SHOOTING
19