User's Manual

4.3 Connection Test
The Connection Test menu item allows the user to
test the connectivity of their player’s configuration
by pinging an IP addresses.
SYSTEM SETUP
17
NOTE:
The system will auto upgrade after loading the disc
contains the upgrade file package.
For more detailed information of System Upgrade,
please reference Upgrade.
After system upgrade, you will find the version has
been changed of the system information menu.
5.4 Firmware Update
Download and install product updates for your player.
5.5 Load Default
Reset all settings of Blu-ray Player to initial default
state.
Note: This DOES reset the Parental Control
Password.
4.2 Information
To view the Network information: Address Type,
IP Address, subnet Mask and so on.
5.2 Disc Auto Playback
Open/close disc auto playback: On/Off
If set to On, the disc will auto playback after loading.
5. System
Screen Saver
Disc Auto Playback
CEC
Firmware Update
Load Defaults
Deactivate Online Serv...
5 Minutes
On
Off
More...
More...
Display
Audio
Language
Network
System
Security
HOME
Exit
RETURN
Use cursor keys to highlight menu and
Enter key to select
5.1
Sets the time of entering screen saver status.
Screen Saver
5.7 System Information
To view the system related information: Software
version, and so on.
5.8 BD-Live Storage
There are two option: Information and Erase BD-Live
data.
5.6 Deactivate Online Service
Reset the website setting.
4.5 BD-Live connection
Select BD-Live connection: Permitted, Partial
Permitted or Prohibited.
Permitted: Always allows Internet access.
Partial Permitted: Allows internet access to BD-Live
content with valid certificates only.
Prohibited: Never allows Internet access.
5.3 CEC
Open/Close CEC (Consumer Electronics Control) ,
which allows all the A/V devices supportable to HDMI
work together as a total system.
When CEC is turned on on your player, CEC is
turned on on your TV, and you use your TV's remote
control to turn off your TV, your player switches to
standby mode. After putting disc into player, use your
player's remote control to turn on your player. When
player is playing the disc, your TV also turns on.
4.4 IP setting
There are two options: Auto and Manual.
Auto: allocate the IP address automatically by system.
Manual : set an IP address manually as below:
a. The Network Information page will display, and the
highlight is in IP Address row.
b. Use UP/DOWN/LEFT/RIGHT buttons to move the
highlight among the columns, use digits 0-9 buttons
to enter the IP Address value, use CLEAR button to
clear the entries.
C. Press ENTER to confirm the IP address you set
manually.