User Manual Part 2

DX-WBRDVD1/DX-WBRDVD1-CA
51
BD-Live technical notes
The Dynex player only supports the connection of USB memory in order to fulfill the
Blu-ray Disc Profile 2.0 or “BD-Liverequirement for 1 GB of free, available storage. An
externally connected drive will become the default storage for BD-Live content and
the internal storage will be ignored.
You must have a BD-Live disc in the player to play any related (already downloaded)
content.
Some BD-Live content may expire and will not play.
You will occasionally need to delete the contents in storage in order to free up space.
This can be done from your players main setup menu, in the System submenu (Select
Clear BD storage). The Dynex player currently only allows deleting the entire BD
storage.
No clock is used to manage the expiration of downloaded BD-live content. Instead,
time and expiration of content is managed by the BD-Live server on the Internet.
Specifications
Specifications are subject to change without notice.
System and outputs
No subtitles Turn on subtitles. See “Selecting the subtitle language” on page 26.
Make sure that the disc was recorded with subtitles. If the disc has subtitles, a
subtitle option should appear on the disc’s menu.
Cannot change the viewing
angle
Some discs are not recorded with multiple viewing angles. Check the
documentation that came with the disc.
Not all scenes on a disc have multiple viewing angles. Check the documentation that
came with the disc.
Resume function does not
work
If you press (stop) twice, the resume information is erased.
Some discs do not support the resume function.
TV signal system NTSC
Video output Electric level output: 1.0 Vp-p
Resistance: 75 ohms
Output connector: Pin jack (1 system)
Audio output (analog) Output level: 2 Vrms (1 kHz, 0 dB)
Output connector: Pin jack
Number of connectors: 2-channel (1)
Audio output (digital) Coaxial digital output (pin jack) (1)
Problem Solution
DX-WBRDVD1_11-0150_MAN_V1.fm Page 51 Monday, April 4, 2011 1:08 PM