User Manual Part 1

DX-WBRDVD1/DX-WBRDVD1-CA
13
Connecting a TV using an A/V cable (good)
To connect a TV using an AV cable:
• Connect an A/V cable to the VIDEO OUT and AUDIO OUT L/R jacks on the back of
your player and to the VIDEO IN and AUDIO IN L/R jack on the TV. Jacks and cable
connectors are usually color-coded. Make sure that you match the colors.
Note:
The A/V cable can only send standard-definition video (480i) to your TV.
Connecting audio to an amplifier or home theater system
To connect audio to a digital amplifier or home theater system:
• Connect a digital coaxial cable from the COAXIAL DIGITAL OUT jack on the back of
your player to the COAXIAL DIGITAL IN jack on the receiver.
Navigating the on screen menus
1 Press ENTER or to open the menus.
2 Press or RETURN to close the menus.
3 Press or to select the desired menu item.
Yellow=Video
White=Left audio
Red=Right audio
TV
Back of player
Back of player
Home theater system
Connect to the
COAXIAL DIGITAL
OUT jack
DX-WBRDVD1_11-0150_MAN_V1.fm Page 13 Monday, April 4, 2011 1:08 PM