User's Manual

Using the Settings menu
15
DX-WBRDVD1
4 Press or one or more times to select the access level you
want. You can select:
• Limit Access—Allows Internet access with valid “BD-Live”
network access approval.
• Always Allow Access—Always allows BD-Live Internet
access.
• Prohibit Access—Never allows BD-Live Internet access.
5 Press to go to the previous menu.
Viewing available BD-Live storage space
To view available BD-Live storage space:
1 Press ENTER. The Settings menu opens.
2 Press or to select BD-Live, then press ENTER. The BD-Live
menu opens. The available storage space is displayed next to
BD-Live Storage.
3 Press to go to the previous menu.
Erasing BD-Live storage
To erase BD-Live storage:
1 Press ENTER. The Settings menu opens.
2 Press or to select BD-Live, then press ENTER. The BD-Live
menu opens.
3 Press or to select Erase BD-Live Storage, then press
ENTER.
4 Press or to select OK, then press ENTER. All bookmarks and
BD-live content saved in memory are deleted.
5 Press to go to the previous menu.
Changing the Network settings
(Note to Reviewers: The source manual was a bit vague on making the
network settings. Please review this section carefully, and verify all
procedures.)
Determining if the network connection is active
To determine if the network connection is active:
1 Press ENTER. The Settings menu opens.
2 Press or to select Network, then press ENTER.
3 Press or to select Wired, then press ENTER. The IP Settings
screen opens. If the network connection is active, Link Up
appears next to Link Status. If the network connection is not
active, Link Down appears next to Link Status.
4 Press to go to the previous menu.
Configuring a wired Internet connection
To configure the wired Internet connection:
1 Press ENTER. The Settings menu opens.
2 Press or to select Network, then press ENTER.
3 Press or to select Wired, then press ENTER. The IP Settings
screen opens.
4 Press or to select IP Mode, then press ENTER.
5 Press or to select an IP mode. You can select:
• Dynamic—Uses DHCP to automatically obtain an IP
address.
• Manual—Lets you manually configure network settings,
such as IP address, subnet mask, and gateway settings. If you
select Manual, the following screen opens. Enter the IP
information here.
• Off—Disables the network interface.
6 Press to go to the previous menu.
Configuring a wireless Internet connection
To configure the wireless Internet connection:
1 Press ENTER. The Settings menu opens.
2 Press or to select Network, then press ENTER.
3 Press or to select Wireless, then press ENTER. The Wireless
Settings screen opens.
4 Press or to select Network List, then press ENTER. The
Network List screen opens, showing a list of available wireless
networks.
Settings
BD-Live
BD-Live Internet Access
BD-Live Storage
Erase Blu-ray Storage
Always Allow Access
USB (225.5MB Free)
Language
System
Network
Display
Parental
Audio
BD-Live
Language
Parental
System
Network
Display
Settings
System
Optical Disc AutoPlay
Screen Saver Duration
Auto Power Down
InLink
Update Via Network
Restore factory defaults
Legal
On
5 Minutes
20 Minutes
Off
BD-Live
Audio
Settings
Language
Parental
System
Network
Display
Audio
BD-Live
Network List
WiFi Protected Setup(WPS)
Manual
IP Settings
Network Test
Wireless
Settings
Language
Parental
System
Network
Display
Audio
BD-Live
Network List
WiFi Protected Setup(WPS)
Manual
IP Settings
Network Test
Wireless
Please enter new IP Address
Valid range of each segment is 0 to 255
Current valu e 111.11.11.11
New Value
OK Cancel
Network
Interface
Link Status
MAC Address
IP Mode
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Signal Strength
Network Name(SSID)
Wireless
Link Up
00:26:4D:B4:01:54
Dynamic
192.168.42.131
255.255.255.0
192.168.42.1
202.96.128.166
10.4.4.11
Excellent
DESAY-KAIFA
Settings
Language
Parental
System
Network
Display
Audio
BD-Live
Network List
Hartleys
Steven
Linsys