User's Manual

Using the Settings menu
9
DX-WBRDVD1
Playing an audio CD
To play an audio CD:
1 Press .
2 Press to open the disc tray.
3 Place a CD on the disc tray with the label facing up, then press
to close the disc tray. It may take a few seconds for the CD to load.
4 To eject the CD, press .
Controlling audio CD playback
To control audio CD playback:
• Press (play/pause) to start or pause playback. The sound is
muted when your player is in pause mode. To resume normal
playback, press (play/pause).
• Press (stop) to stop playback completely. Press
(play/pause) to start playback again. Playback starts at the
beginning of the CD.
• Press to fast-forward. Press (play/pause) to resume
normal playback.
• Press to fast reverse. Press (play/pause) to resume
normal playback.
• Press to go to the previous track. Press to go to the next
track.
• Press SEARCH to select a track, enter the track number
immediately with the number buttons, then press ENTER.
Or,
Enter the track number by pressing the appropriate number
buttons.
Searching for a title, chapter, or elapsed
time
To search for a title, chapter, or elapsed time:
1 During playback, press SEARCH one or more times to select a
search mode.
• One press selects Goto Title - - - mode.
• Two presses selects Goto Chapter - - - mode.
• Three presses selects Goto Time --: -- : -- mode.
2 Press the number buttons to enter the title number, chapter
number, or time, then press ENTER. Your player goes to the title,
chapter, or time you entered.
Repeating a title, chapter, or CD track
To repeat a title, chapter, or CD track:
• To repeat a title or chapter, press REPEAT one or more times to
select a repeat mode. You can select Off, Repeat Title, Repeat
Chapter, Repeat track, Repeat all, or Random.
Creating a playback loop on a DVD or
audio CD
Note: Blu-ray Discs do not normally support playback loops.
To create a playback loop:
1 Play the disc until you reach the point where you want the loop to
start, then press A-B.
2 Play the disc until you reach the point where you want the loop to
stop, then press A-B. Your player plays the loop you created
repeatedly.
3 Press A-B to cancel the loop and return to normal playback.
Using PIP (Picture In Picture) mode
Some Blu-ray Discs are compatible with Picture In Picture (PIP) mode. In
PIP mode, the primary video is displayed on the full screen, and the
secondary video is displayed in a small window.
See the documentation that came with the disc for playback
instructions.
To use PIP mode:
1 Press PIP to turn PIP mode on or off.
2 If PIP mode is on, press SECONDARY AUDIO to turn the audio for
the video in the PIP window on or off.
Using a disc popup menu
To use a disc popup menu:
1 During Blu-ray or DVD playback, press
POPUP MENU/TITLE MENU. The Blu-ray popup menu or DVD
disc menu opens.
2 Press or to select an option, then press ENTER.
Selecting the audio mode
To select the audio mode:
1 Press AUDIO. Your player displays audio channel information,
such as “01/03 Eng Dolby Digital.” “01” indicates the currently
selected audio channel. “03” indicates the total number of audio
channels. “Eng” (English) indicates the audio language. “Dolby
Digital” describes the currently selected audio format.
2 Press to select an audio mode.
Selecting a viewing angle
Note: Not all discs are recorded with multiple viewing angles and not all
scenes on a disc have multiple viewing angles.
To select the viewing angle:
• During playback, press ANGLE. Your player displays “Angle X of
X.” The first “X” indicates the current viewing angle, and the
second “X” indicates the total number of viewing angles.
Using the Settings menu
The settings menu is displayed on the screen automatically under No
Disc or Stop situations.
To use the Settings menus:
1 Press ENTER on the remote control. The Settings menu opens.
Primary video
Secondary video
Settings
Language
Network
Display
Audio
Language
Parental
System
OSD
Menu
Audio
Subtitle
English
Auto
Auto
None
BD-Live