User's Manual

ManualsBrandsDESAY A & V SCIENCE AND TECHNOLOGY ManualsBlu-Ray PlayersBlu-ray Disc Player, support WIFI function

UPGRADING YOUR PLAYER’S FIRMWARE

The company that produced this player may

occasionally offer upgrades to the player’s software.

There are three ways to update the player:

If your player is connected to the internet, new software

can be downloaded and installed onto the player

using your network connection. If new software is

available, you will see a message similar to the

following:

Update via network

Upgrading Your Player

’

s Firmware

There is a firmware update available which provides the following updates:

It is recommended that you update the player firmware to this new version:

player current version:

Update version:

This is on server www.mfgr.com

Press OK to update

Press CANCEL to exit with no update

A software Update is about to begin

Please do not power off your player

PKG_DVD_3_1_014_RC_BestBuy_02

PKG_DVD_3_1_016_RC_BestBuy_03

Cancel

If you see this message, and wish to update the

player’s firmware,

use the arrow keys to highlight “OK”, and then press

‘Enter’. The software will begin downloading, and a

status bar will appear on the TV screen, similar to

what is shown below:

press the color key, then you'll

see the dialog below:

Update in progress, time remaining:

0:00:35

A software update is in progress

Please do not power off your player.

Once the update is complete, a message will appear

indicating that the player will turn itself off and on.

2. Creating an Upgrade CD or USB Stick

In order to perform the upgrade, you must first go to

From there, you must either create an upgrade disc,

or an update USB stick.

the company’s website and click on the ‘support’ link

(Need BBY to fill this)

Creating an update disc

I. Download the firmware upgrade .iso file to a

computer, then do one of the following:

ii. Copy the .iso file directly to a data CD or DVD,

then finalize the disc; OR Use commercial software,

such as Nero , to ‘burn’ the .iso file onto a disc.

Creating an update USB Stick

i. Download the firmware upgrade .iso file to a

computer with a USB port.

ii. Copy the .iso file to the root directory of the USB

stick.

3. Upgrading the Player Software With a Disc or

USB Stick

Once you have created an update CD or USB stick

as described in the section, perform the following

steps to update the player’s software:

1. Eject any discs that may be in the player, and

remove any USB sticks already inserted in the player.

2. Turn the player off.

3. Turn the player back on. If using an upgrade USB

stick, insert the USB memory stick into the player’s

USB slot. If you are using an upgrade disc, open the

tray and insert the update disc.

4. a screen similar to the one below

will appear

After a while,

Below, select Ok to proceed with the update or Cancel to abort, then press the Enter key

Player model

Player current version:

Update version:

INSIGNIA NS-WBRDVD2 BD Player

PKG_DVD_3_1_014_RC_BestBuy_02

PKG_DVD_3_1_016_RC_BestBuy_03

Cancel

5. Press the Enter key. The software update will begin.

During the software update, a timer will count down

the approximate number of minutes and seconds

remaining for the update.

6. Once the update is complete, a screen will appear.

If you used a disc for the update, the disc will be

ejected, you should remove the disc and close the

tray, then the system will reboot automatically.

If you used an update USB stick, you should remove

the USB stick, then the system will reboot automatically.

A software update for your player is

available, containing:

Various updates;

Press (red button) to install

these updates