User's Manual

15
Connected Blu-Ray Disc Player
www.insigniaproducts.com
4 Press or to select the digital output mode
you want. You can select:
• PCM—Sends mixed digital audio over the
HDMI connection in 7.1CH PCM (if supported
by HDMI device) and the SPDIF connection in
two-channel PCM format.
• Bitstream HD—Sends the original bitstream
from the disc over the HDMI and SPDIF
connections using highest quality possible.
HDMI has the higher quality capabilities with
advanced audio codecs like TrueHD and
DTS-HD. Blu-ray audio is limited to the
soundtrack for the main movie (no PIP audio
and no effects audio).
• Bitstream Legacy—Sends the original
bitstream from the disc over the HDMI and
SPDIF connections using legacy audio
formats. Blu-ray audio is limited to the
soundtrack for the main movie (no PIP audio
and no effects audio).
• Bitstream mixed—Sends mixed and encoded
Blu-ray audio streams in a single bitstream.
This mode is primarily intended for use with
SPDIF 5.1CH receivers to produce mixed
Blu-ray audio in surround sound.
5 Press to go to the previous menu, or press
SETUP to return to the root menu.
Turning dynamic range control on or off
Dynamic range control is only active when a Dolby
Digital signal is detected.
When Dynamic Range Control is set to Off, movie
soundtracks are played with the standard dynamic
range.
When movie soundtracks are played at low volume
or from smaller speakers, you can set Dynamic
Range Control to On. Your player applies
appropriate compression to make low-level content
more intelligible and prevent dramatic passages
from getting too loud.
To turn dynamic range control on or off:
1 Press SETUP. The Settings menu opens.
2 Press , press or to select Audio, then press
ENTER. The Audio menu opens.
3 Press or to select Dynamic Range Control,
then press ENTER.
4 Press or to select On or Off.
5 Press to go to the previous menu, or press
SETUP to return to the root menu.
Setting the parental control password
Before you can set parental control, you must set a
password.
To set the parental control password:
1 Press SETUP. The Settings menu opens.
2 Press , press or to select Parental, then
press ENTER. The Parental menu opens.
3 Press or to select Parental Password, then
press ENTER.
4 Enter the default password (0000). If you forget
your password, enter 0000.
5 Press to go to the previous menu, or press
SETUP to return to the root menu.
Turning parental controls on or off
In the following task, when do you enter the
password?
To turn parental controls on or off:
1 Press SETUP. The Settings menu opens.
2 Press , press or to select Parental, then
press ENTER. The Parental menu opens.
3 Press or to select Parental Control, then
press ENTER.
4 Press or to select On or Off, then press
ENTER. If you select On, you can change the
other parental control options. If you select Off,
you cannot change the other parental control
options.
Settings
Au dio
PCM Downsamp ling
Digital Output
Dynamic Range Contro l
48 K hz
PCM
O
Language
Audio
Network
System
Display
Parental
Settings
Parental
Parental Country
Parental Control
Parental Level
Parental Password
USA
O
8[A udlt ]
Language
Audio
Display
Parental
System
Network
Settings
Parental
Parental Country
Parental Control
Parental Level
Parental Password
USA
O
8[A udlt ]
Language
Audio
Display
Parental
System
Network