Instructions / Assembly

www.dero.com | 1-888-337-6729
© 2015 Dero
54”
The Tool Kit wall-mount should be installed with
the center of the Tool Kit 54” above the ground.
Once the base is installed, place the tool cables
in the slots, and fasten the cap with the provided
3/8” tamper-resistant bolt.
The wall guard can be mounted to prevent
hanging tools from damaging the wall.
There are 4 mounting holes; only 2 need to be
used. For installations into a vertical stud, use
the 2 vertically oriented holes. The horizontally
oriented holes can be used for other types of
installation. 3/8” wedge anchors, lag bolts, or
other fasteners may be used.
1
3 4
2
TOOL KIT
Installation Instructions – Wall Mount