Instructions / Assembly

www.dero.com | 1-888-337-6729

TOOL KIT

Setbacks

Surface Mount:

Wall Setback: The Tool Kit should be at least 12” from a wall. Both sides of the Tool Kit should

be 36” from either wall.

No part of the Tool Kit should protrude onto a walkway, bike lane, or common area.

Street Setback: The Tool Kit should be at least 60” from the street.

Wall Mount:

Wall Setback: The Tool Kit should be mounted on a wall at least 54” from the ground to the

center of the Tool Kit. The Tool Kit should be 36” from an adjacent wall.

PAGE 1
TOOL KIT Setbacks Surface Mount: Wall Setback: The Tool Kit should be at least 12” from a wall. Both sides of the Tool Kit should be 36” from either wall. No part of the Tool Kit should protrude onto a walkway, bike lane, or common area. Street Setback: The Tool Kit should be at least 60” from the street. Wall Mount: Wall Setback: The Tool Kit should be mounted on a wall at least 54” from the ground to the center of the Tool Kit. The Tool Kit should be 36” from an adjacent wall. www.dero.
PAGE 2
TOOL KIT Installation Instructions – Surface Mount TOOLS NEEDED RECOMMENDED BASE MATERIAL Tape Measure Marker or Pencil Masonry Drill Bit Drill (Hammer drill recommended) Hammer Wrench 9/16” Level Solid concrete is the best base material for installation. To ensure the proper anchors are shipped with your Tool Kit, ask your Dero Tool Kit representative which anchor is appropriate for your application. Be sure nothing is underneath the base material that could be damaged by drilling.
PAGE 3
TOOL KIT Installation Instructions – Wall Mount 1 2 54” The Tool Kit wall-mount should be installed with the center of the Tool Kit 54” above the ground. There are 4 mounting holes; only 2 need to be used. For installations into a vertical stud, use the 2 vertically oriented holes. The horizontally oriented holes can be used for other types of installation. 3/8” wedge anchors, lag bolts, or other fasteners may be used.