Instructions / Assembly

Place the rack in the desired location. Use a
marker or pencil to outline the holes of the flange
onto the base material.
Use washers to level rack if necessary. Tap in anchors and follow your specific anchor
instructions provided with the rack.
Drill the holes in accordance with the
specifications shipped with the anchors. Make
sure the holes are at least 3” away from any
cracks in the base material.
1
3 4
2
TOOLS NEEDED
Tape Measure
Marker or Pencil
Masonry Drill Bit
Drill (Hammer drill recommended)
Hammer
Wrench 9/16”
Level
RECOMMENDED BASE MATERIAL
Solid concrete is the best base material for installation. To ensure
the proper anchors are shipped with your rack, ask your Dero Rack
representative which anchor is appropriate for your application.
Be sure nothing is underneath the base material that could be
damaged by drilling.
www.dero.com | 1-888-337-6729
© 2015 Dero
HOOP RACK
Installation Instructions – Surface Mount