Instructions / Assembly

ManualsBrandsDero ManualsCommercial Bike RacksAction 5-Bike Black Powder Coat Surface Mounted Wave Bike Rack

1

2

Wave 5 Rack

Installation

1. Place the rack in the desired location. Use

a marker or pencil to outline the holes of the

ange onto the base material.

4. Thread nuts onto anchors, leaving

approximately 1/4” of the anchor protruding,

and tap into surface. Tighten nuts down to

secure rack.

3. Place rack (and washers to level rack if

necessary) over holes.

2. Drill 3/8” diameter holes 3” deep into

surface. Make sure the holes are at least 3”

away from any cracks in the base material.