User's Manual

SAFETY INSTRUCTIONS
8 / 22 DERMALOG FLC1 User Guide
3 Safety instructions
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
These safety instructions must be read and understood prior to installation and operation by any person working
with the DERMALOG FLC1. Keep these instructions always readily available at the DERMALOG FLC1.
Also pay attention to any warning messages shown by DERMALOG software, to any signs or labels on the
DERMALOG FLC1 and to any further DERMALOG instructions shipped with the DERMALOG FLC1.
3.1 Purpose of this product
The DERMALOG FLC1 captures facial images and detects the body temperature of a person.
The DERMALOG FLC1 detects the body temperature of a person in order to make a preselection.
The temperature detection is no medical fever measurement. In suspected cases a reference
measurement with the clinical thermometer is necessary.
3.2 General
CUTTING DAMAGE.
Always check the DERMALOG FLC1 for any visible damages before use. Do not use the DERMALOG FLC1 if
you see any visible damage (for example, sharp edges, broken safety coverings and so on) as this may
cause injury.
Do not use a damaged DERMALOG FLC1.
To avoid damage on a USB cable, do not step on the cable, do not place heavy items on it and do not pull it
forcefully. When disconnecting a USB cable, firmly grasp the USB plug to remove it from the computer.
Avoid any mechanical load on the DERMALOG FLC1, especially on the glass coverings of the cameras and the
infrared projector, to prevent the DERMALOG FLC1 from breaking. Never place heavy items on the DERMALOG
FLC1.
3.3 Transportation and storage
TRANSPORTATION
Use the packaging provided by DERMALOG.
Only use covered vehicles or covered ships.
The environmental conditions during transport must meet the conditions specified in the technical data (see
chapter 5).