Use Instructions

14
CHARGING INSTRUCTIONS
 First, connect the USB C cable to the charging port of the device.
 If using your computer to charge, connect the large end of the USB cable to the USB port of your computer.
 Alternately, connect the large end of the USB cord to the wall plug adaptor and plug into a wall outlet.
 When your NIRA Skincare Laser is connected to a power source, the baery indicator lights will ash unl the baery is fu lly charged. Once the baery is fully charged, the
baery indicator lights will stop ashing. It should take no longer than 3 hours to fully charge the device.
 A fully charged device will last approximately 4 hours of connuous use. This equates to several weeks of daily usage betwee n charges. This me will vary with sengs and will
lessen as the baery ages.
 Your NIRA Skincare Laser will not work when it is plugged into the baery charger.
Unplug your NIRA Skincare Laser before treatment.
Charger State Baery Indicators Condion
Charger disconnected
Normal operaon—Baery
over half charge
Normal operaon—Baery
less than half charge
Very low charge. May stop
funconing.
Charger connected
Sll charging. Less than half
charge.
Sll charging. More than
half charge.
Charge complete.
Disconnect and treat.
Top is OFF
Boom is Blinking
Top is Blinking
Boom is ON
Top is ON
Boom is ON
Top is OFF
Boom is Blinking
Top is OFF
Boom is ON
Top is ON
Boom is ON
Accessories: Micro USB 2.0 Type C Cable, 5V 2A Fixed Blade Wall Plug -in Power Supply
Note: Treatment is disabled during charging.