Use Instructions

12
RECOMMENDED USE INSTRUCTIONS
Before using the NIRA BEAUTY Skincare Laser read the enre Instrucons for Use booklet. You may also wish to watch the instruconal video at www.nirabeauty.com/
video.
PREPARE
 Cleanse your skin with your preferred skin cleanser.
 Dry your face thoroughly before you begin treatment.
 If your skin is already clean and dry, you can skip this step.
TREAT
 Turn on your NIRA BEAUTY Skincare Laser by pressing the power buon once. You will hear a high-pitched beep and the lights will turn on. Press
the power buon again to increase the power level to the desired strength. Use the highest power level where you feel warmth without pain.
 Place the Laser Aperture (Applied Part) at against the skin then press the Treatment Buon. You will hear one high-pitched beep and see the
power level lights ashing when the device starts treang. Keep the device p pressed completely to skin during treatment.
 If you hear a lower pitch beep when pressing the treatment buon or during the treatment, this means the p does not have complete contact
with the skin. If this occurs, li the p completely o the skin and reposion the p and try again.
 Aer about one second you will hear another beep and you may move the device p to the next spot and repeat.
 Treat the skin in a linear paern so all areas of interest are treated evenly with slight overlap between pulses.
 When nished, hold the power buon for about 2 seconds to power down the device. The unit will automacally power down aer 2 minutes
with no acvity. It is recommended to clean the exterior of the NIRA BEAUTY Skincare Laser aer each use with a damp cloth. Connue with
your daily skincare roune.