Use Instructions

PRE-USE INSTRUCTIONS



Be sure baery is charged. If the baery is charged, unplug baery charger prior to use.

The NIRA BEAUTY Skincare Laser will not operate while the device is connected to the USB.



Turn on the device by pressing the power buon located on the lower end of the device.



You may wish to test on your forearm and adjust power seng to get familiar with the sensa-

on experienced at each level. We recommend starng at the lowest level.



Press the Laser Aperture fully against the skin, then press the Treatment Buon to re the

laser.



Press the power buon again to increase power from levels 1 to 5, then back to 1 unl you

nd the highest level that where you feel warmth from the device without pain. This seng

will vary by treatment locaon.

Note: you may use dierent power sengs on dierent parts of your body depending on the sensi-

vity of the treatment area. For example, areas such as under the eye should be treated starng at

the lowest level to test the area then gradually increase the power level if desired.