Use Instructions

10
CHARGING INSTRUCTIONS
First, connect the USB cable to the charging port of the device.
If using your computer to charge, connect the large end of the USB cable to the USB port of your computer.
Alternately, connect the large end of the USB cord to the wall plug adaptor and plug into a wall outlet.
When your NIRA BEAUTY Skincare Laser is connected to a power source, the baery indicator lights will ash unl the baery is fully charged.
Once the baery is fully charged, the baery indicator lights will stop ashing. It should take no longer than 5 hours to fully charge the device.
A
fully charged device will last approximately 4 hours of connuous use.
This me will vary with sengs and will lessen as the baery ages.
Note: Treatment is disabled during charging.
Charger State Baery Indicators Condion
Charger disconnected
Normal operaonBaery
over half charge
Normal operaonBaery
less than half charge
Very low charge. May stop
funconing.
Charger connected
Sll charging. Less than half
charge.
Sll charging. More than half
charge.
Charge complete. Discon-
nect and treat.
Top is OFF
Boom is Blinking
Top is Blinking
Boom is ON
Top is ON
Boom is ON
Top is OFF
Boom is Blinking
Top is OFF
Boom is ON
Top is ON
Boom is ON