Operation Manual

Shenzhen Dericam Technology Co .,Limited www.dericam.net

Note Attention: Suffix ” _1 ” is main-stream parameters , Suffix “ _2 ” is sub-stream

parameters .

Example / cgi-bin/hi3510/getvencattr.cgi?-chn= 11

param.cgi?cmd=

param.cgi?cmd= setvencattr

setvencattr

Function To config video codec parameters

Authority admin

Syntax / cgi-bin/hi3510/param.cgi [ ?

cmd =setvencattr&-chn=&-bps=&-fps=&-brmode

=&-imagegrade=&-gop=

]

parameters chn

Channel number :

11: main-stream

12: sub-stream

bps Bit Rate :

720P: range [1024 ~ 6144 kbps]

D1: range [32 ~ 2048 kbps]

CIF: range [32 ~ 512 kbps]

QCIF: range [32 ~ 256 kbps]

QVGA: range [32 ~ 512 kbps]

VGA: range [32 ~ 2048 kbps]

QQVGA : range [32 ~ 256 kbps]

fps F rame rate:

PAL: range [1 ~ 25]

NTSC: range [1 ~ 30]

brmode Video coding control :

0: Fixed rate

1: V ariable bit rate

imagegrade v ideo encoding quality : range [1 ~ 6]

Attention The smaller the value, the better the image

quality , the larger the stream control

gop M ain frame interval : range [2 ~ 150]

Return Value

Success: contain Success

Failure: contain Error

Note None

Example / cgi-bin/hi3510/param.cgi ? cmd=setvencattr&-chn=11&-bps=1536&-fps=25

&-brmode=1&-imagegrade=1&-gop=50

/ cgi-bin/hi3510/param.cgi ? cmd=setvencattr&-chn=1 2 &-bps=1536&-fps=25

&-brmode=1&-imagegrade=1&-gop=50