Operation Manual

Shenzhen Dericam Technology Co .,Limited www.dericam.net

Attention:

workday and weekend field only used in working days rest days mode,

week0 ~ week 6 field only used in all week mode,and start time must be less

then end time .

T he calculation method of these start and end time field are:

If time is 0 hour 0 miniute, it will be set to “ none ” ,

Other cases according to the following formula :

strart-time = start-hour * 4 + start-minute number

end-time = end-hour * 4 + end-minute number - 1 ；

One minute is split to four t ime period : 0(number is 0), 15(number is 1),

30(number is 2) and 45(number is 3).

For example:

I f s pecify a start time of 8:30 , then start-time = 8*4+2=34,

I f s pecify a end time of 8:30 , then end-time = =8*4+2-1=33

Note

Example / cgi-bin/hi3510/param.cgi ? cmd=setschedule&-type=event&-ename=md&-etm

=1&-workday=0 ~33 &-weekend=none

/ cgi-bin/hi3510/param.cgi ? cmd=setschedule&-type=event&-ename=md&-etm

param.cgi?cmd=getalarmserverattr

Function

To get alarm server parameters

Authority

admin

Syntax / cgi-bin/hi3510/param.cgi [ ?cmd= g et alarmserverattr]

parameters None

Return Value as_server S erver address

as_port S erver port (1-65535)

as_username username

as_password password

Note None

Example / cgi-bin/hi3510/param.cgi?cmd= g et alarmserverattr