Operation Manual

Shenzhen Dericam Technology Co .,Limited www.dericam.net
15
Syntax / cgi-bin/hi3510/param.cgi [?cmd= getinfrared ]
parameters None
Return Value infraredstat
Infrared LED Status:
a uto
open
close
Note
Some device does not support to change these attributes , reference to
Appendix I: Definition of device type
Example
/ cgi-bin/hi3510/param.cgi?cmd=getinfrared
param.cgi?cmd=s
param.cgi?cmd=s
param.cgi?cmd=s
param.cgi?cmd=s etinfrared
etinfrared
etinfrared
etinfrared
Function
To set Infrared LED parameters
Authority admin
Syntax / cgi-bin/hi3510/param.cgi [?cmd=s etinfrared ]
parameters None
Return Value infraredstat Infrared LED Status:
a uto
open
close
Note
Some device does not support to change these attributes , reference to
Appendix I: Definition of device type
Example
/ cgi-bin/hi3510/param.cgi?cmd=
s
etinfrared &-
infraredstat =auto
3
3
3
3 Network
Network
Network
Network
param.cgi?cmd=
param.cgi?cmd=
param.cgi?cmd=
param.cgi?cmd= getnet
getnet
getnet
getnet attr
attr
attr
attr
Function
To get network parameters
Authority admin
Syntax / cgi-bin/hi3510/param.cgi [?cmd= getnet attr]
parameters None
Return Value dhcpflag DHCP:
on: enable
off: disable
ip IP address
netmask xxx.xxx.xxx.xxx