Operation Manual

VIII User Manual Pedelec Xion 17
5.4 Programming and settings
Aer switching on the Xion system, you can switch to the
programming mode by pressing the diamond button. This
only works when the Pedelec is at a standstill. It is always
possible when the “M” is visible in the diamond of the
power-assist mode.
You are taken to the menu sub-items
• Back
• Tour Reset
• Assist mode
• Brake assist
• Push assist
• Settings
You can select the menu sub-items using the arrow but-
tons on the control panel. You can conrm your selection
by pressing the diamond button. The respective contents
are then displayed for you. In order to return to the start
menu display om the menu sub-items, you must select
the menu item “Back” and conrm by pressing the dia-
mond button.
5.4.1 Tour Reset
Under the menu sub-item “Tour Reset” you can delete
your tour data. As soon as you press the diamond button,
the tour kilometres, the average speed and the journey
time for the tour are deleted – and you are taken back to
the start menu.
5.4.2 Assist mode
Under the menu sub-item “Assist mode” you can set the
assist level of your motor. To do so, press the diamond
button and navigate to the desired mode. You can choose
between: ECO and Sport. Once you have decided, press
the diamond button.
Assist mode
Brake assist
Push assist
Sengs
Assist mode
Brake assist
Push assist
Sengs
Assist mode
DISPLAY ASSIST LEVEL
ECO This means the assistance is only working
with a low level of eort. Therefore, lon-
ger ranges can be achieved.
Sport
This means the assistance is working hard.
As a result, power consumption is higher
and the range shorter.