Operation Manual

14 VIII User Manual Pedelec Xion
To switch your Pedelec o, press the diamond button on
the control panel for around two seconds whilst in the
start menu. This will take you to the sub-menu.
Navigate to the item “Shutdown” using the arrow buttons
and conrm using the diamond button.
5.1.2 Buttons for power-assist level
• You can speci the power-assist level using the
arrow buttons.
• Each time you press an arrow button, the power
assist changes by one level.
• If you press the upper arrow button, the level of
assistance increases by one level each time you
press it.
• If you press the lower arrow button, the assistance
becomes weaker each time you press it.
5.2 Display
Back
ShutdownShutdown
1 Speed
2 Power-assist mode/energy recovery
3 Battery charge state
4 Remaining range
5 Variably adjustable display
1
3
2
4
5
The display in the middle of the handlebar is divided into
ve dierent display panels.
• At the top on the right is your current
1
speed.
• On the le is a display showing the
2
power-
assist mode you have selected or the level of
energy recovery.
• In the middle on the right hand-side is the
3
battery symbol, which tells you the current charge
status of your Pedelec’s battery.
• The remaining
4
range is displayed to the right
of the display for the
2
power-assist mode.
• Below this you will see
5
the date or the time,
for example. In place of these, the following data
can also be called up:
• Distance covered during the day (in km).
• The journey time taken to cover this distance.
• The average speed (in km/h).
• The maximum speed reached
(in km).
• The total mileage (in km).
• The total journey time taken to cover this
distance.
• The average speed based on this data
(in km/h).
• Your personal contribution as the rider (in Wh).
• The power consumption.