Operation Manual

VIII User Manual Pedelec Xion 9
1 Quick start
1. Charge the battery completely before riding for the
rst time. Charge temperature: 0°C to 45°C.
2. Remove the cover om the charging socket.
3. Connect the plug of the charger to the battery. When
positioned correctly, the plug is held in the socket by
magnets.
4. Insert the mains plug for the charger into the socket.
You must lly charge the battery before using it for the
rst time.
You can also remove the battery om your Pedelec
and charge it elsewhere. For more information on this
subject, refer to ➠ Chapter 4 “Charging the battery”.
5. The charge state of the battery is indicated by ve
LEDs. The battery LEDs light up or ash during charg-
ing. Once all of the LEDs have gone out, the battery is
lly charged.
Charging the battery
6. If you removed the battery for charging, replace it in
the holder om the ont/above. At the same time, the
key must be in the lock and must be turned anticlock-
wise. Press the battery down into the holder until the
locking mechanism engages. Now turn the key clock-
wise and remove it. The battery is now locked in place.
Be sure to make a note of the number engraved on
your key. In case you lose both keys, you have an
opportunity to obtain an appropriate replacement key
by quoting the correct number.
Installing the battery
Locking the battery