Operation Manual

- In order to free off the torque
applied to the balance shaft gear
securing nut, in those engines fitted
with this unit (1), insert the special
tool (part number 00H05600231).
- Using the special tool (part number
00G05300011), fitted to the flywhe-
el, block the crankshaft from tur-
ning, and proceed to slacken off the
crankshaft output gearing securing
nut.
- Check the thickness of the clutch
lining on each disc using a caliper
gauge.
Service limit: 3.6 mm.
- Replace any disc which shows
signs of losing its lining, thermal fati-
gue (heat discolouration), deforma-
tion, or which has damage on the
external castellation.
- Check the clutch discs for warping.
Service limit: 0.15 mm.
- Replace any discs which have lost
any lining, show signs of thermal
fatigue (heat discolouration), or
which has damage on the internal
castellation.
11-2