Operation Manual

66
CRANKSHAFT AND BALANCER SHAFT
1. Fit:
- Crankcase separator
Crankcase separator:
00M12501261
2. Fit:
- Crankshaft
N.B.
HOLD THE CONNECTING ROD WITH ONE HAND WHI-
LE TURNIING THE NUT ON THE SPECIAL TOOL WITH
THE OTHER HAND. USE THE TOOL UNTIL YOU FEEL THE
CRANKSHAFT FIT INTO THE BEARING.
ATTENTION
TO PREVENT SCRATCHING TO THE CRANKSHAFT AND TO
HELP ITS FITTING, APPLY GREASE TO OIL SEAL EDGES AND
ENGINE OIL TO THE BEARINGS.
3. Fit:
- Rocker shaft.
Always use new rubber rings.
4. Fit:
- Neutral switch
CRANKSHAFT
AND
BALANCER
SHAFT