Operation Manual

53
GEAR CHANGE SHAFT
N.B.
THE GEAR CHANGE SHAFT CANNOT BE DISMANTLED
WITH THE ENGINE MOUNTED IN THE FRAME. SEE “REMO-
VING THE ENGINE FROM THE CHASSIS”.
1. Extract:
- Gear change shaft (1).
- Bolt (2).
- Positioning cam (3)
- Torsion spring (4).
CRANKCASE
1. Extract:
- Bolts (crankcase).
- Battery cable bracket.
N.B.
UNDO THE BOLTS DIAGONALLY.
LOOSEN EACH BOLT A QUARTER TURN IN TURN, AND RE-
MOVE THEM WHEN THEY ARE COMPLETELY LOOSE.
2. Position:
- The segment of the gear selector in such a way that it can
pass through the hole and enable the crankcases to be se-
parated.
G CGS
CRANKCASE