Operation Manual

34
- To remove the top cover, remove the clips securing the filter
body (see picture).
- Extract the foam air filter, wash it in soapy water, then wring
it out and dry it completely. Next, soak it in special oil for fil-
ters and refit it.
Fitting:
- Fit in reverse order to dismantling.
- Then refit the top filter cover.
- Seal the box cover with silicon.
Recommended oil:
AGIP FILTER OIL
WARNING
NEVER USE PETROL TO CLEAN THE AIR FILTER ELEMENT. A
SOLVENT OF THIS TYPE MAY CAUSE FIRE OR EXPLOSION.
ADJUSTING THE CLUTCH
Check:
- Clutch cable play (a).
Outside that specified => Adjust.
Clearance (clutch lever):
10 – 15mm at the end of the lever.
2. Adjust:
- Clutch cable play.
Adjustment steps:
Lever end.
- Turn the adjuster (1) inwards or outwards until the specified
play is obtained.
Turning inwards (a)= Increases the play.
Turning outwards (b) = Reduces the play.
JUS G CUC