Operation Manual

32
INSPECTING THE ENGINE OIL LEVEL
1. Place the motorcycle on a flat surface.
N.B.
MAKE SURE THE MOTORCYCLE IS VERTICAL WHEN CHEC-
KING THE OIL LEVEL.
2. Start the engine and leave to warm up for a few minutes.
3. Stop the engine.
4. Check the oil level in the inspection window (1) (located
in the right hand crankcase cover).
N.B.:
THE OIL LEVEL MUST BE BETWEEN THE MAXIMUM (2) AND
THE MINIMUM (3).
5. If the oil is below the minimum level, add oil up to the
correct level.
RECOMMENDED OIL FOR THE ENGINE
Recommended oil for the engine:
SAE 10W40 or higher
6. Start the engine and leave to warm up for a few minutes.
7. Stop the engine.
N.B.
WAIT A FEW MINUTES FOR THE OIL TO PERCOLATE DOWN
BEFORE RE-CHECKING THE OIL LEVEL.
CHANGING THE ENGINE OIL
1. Start the engine and leave to warm up for a few minutes.
2. Stop the engine and place a container under the engine.
3. Extract:
- Oil filler cap (1).
- Oil drain plug (2).
Drain the oil from the crankcase.
4. Fit:
- Drain plug (1).
Drain plug:
2,0 Kgf.m (20 N.m)
INSPECTING
THE
ENGINE
OIL
LEVEL
RECOMMENDED
OIL
FOR
THE
ENGINE
CHANGING
THE
ENGINE
OIL